Smart Border Initiatives
Responding to fluctuating flows of pedestrians and vehicles
U.S. Customs and Border Protection (CBP) currently cannot readily adjust the number of open border gates at ports of entry to meet fluctuating need, due to lack of information (“tactical intelligence”) about the numbers of persons and vehicles waiting on approaches to the border on the Mexican side.
Provide CBP with an accurate and measurable way to know wait times for passenger vehicles, cargo and pedestrians.Enablers
- Tijuana Carriers
- App providers
- Baja California State Government
12/31: As of the end of the year, Caltrans was considering grant possibilities to purchase, install and maintain WiFi readers. State of Baja has not allocated funds yet. US reliance likely 100%. BirdsEye Aerial Drones and CBP have opened up a discussion about using drones
10/15 Caltrans is looking into grant possibilities to purchase, install and maintain WiFi readers. State of Baja has not allocated funds. US reliance likely 100%. BirdsEye Aerial Drones and CBP have opened up a discussion about using drones.
8/28 Wait time reader project discussed with Caltrans and SECTURE. This is a $260,000 project that includes reader installation. CALTRANS has the back office support (algorithms and systems) and has budget for Southbound wait time measurement projects on the entire California border. It would be ideal to have the complementary Mexican wait times. SECTURE is looking into resources to invest this year. SECTURE will look into additional quotes, as the group believes we can lower the amount.
7/3 Conversation with Birdseye Aerial Drones and Bluenose IT to use San Diego designation as a UAS (Unmanned Aircraft System) Integration Pilot Program to explore options for tethered drones in border area airspace to measure wait times and make reports available to agencies and crossers.
7/3 For Southbound vehicles at El Chaparral, SBC will approach SAT regarding idea to redesign the entry area where bays are.
Commercial Crossing Information System Commercial Crossing Information System monitoring has been useful in analyzing shortcomings of Unified Cargo Processing at Otay Mesa (monitoring 45 trucks). SBC has assigned a small budget for a proposal from GMX-21 to share real time data and analytics with agencies.
Meetings Had meetings with Adaptive Motion Group of San Diego to explore installing sensors on light posts to measure wait times.
6/22 On 6/22/18 revived conversations with Caltrans to launch Northbound wait time management sensors similar to the Southbound system being piloted today.
Started discussions with CANIETI Started discussions with CANIETI (IT National Chamber, Tijuana Chapter) to strategize on ways to establish alliances with local technology companies to measure vehicle and pedestrian wait times.
Met with Caltrans on 2/14 to discuss supporting Met with Caltrans on 2/14 to discuss supporting their efforts to launch Northbound wait time management sensors similar to the Southbound system being piloted today. SBC is willing to get involved from a donation perspective as well as governance through its relationship with Tijuana’s Local Development Council. We can work with the Mexican Communications and Transportation Ministry or do it independently with our own funds and CDT resources (FIDEM). We keep the solution local and we establish helpful governance. SBC/Caltrans can then offer both data to the community at large and actionable reports for CBP and SAT a bit later on.
2/15 Established a relationship with Juan Carlos Villa Regional Manager Latin America Texas A&M Transportation Institute. They have funds from DHS to implement a cargo wait time solution at Otay Mesa using RFID.
The flow of cargo trucks to and from the Otay Mesa Port of Entry is hampered by the deficient condition and configuration of Tijuana streets and roads carrying the traffic. Inspections are slow because of insufficient numbers of U.S. and Mexican agents, too few lanes, and overdue implementation of available technological solutions.Proposed Solution
Improve and segment access roads on the Mexican side of the border and adopt technologies to reduce bottlenecks.Enablers
- City of Tijuana
- U.S. Customs and Border Protection (CBP)
- Servicio de Administracion Tributaria (SAT)
- Consejo Coordinador Empresarial (CCE)
- Cámara Nacional de la Industria de Transformación (CANACINTRA)
- Carrier Association (CANACAR)
- Otay Mesa Industrial Association (AIMO)
- Tech and telecom companies
CANACINTRA (Manufacturing Industry Association): CANACINTRA (Manufacturing Industry Association) received funding for $35 million pesos from the City and State to pave a circuit that includes 4 streets adjacent to the OM: new CaliBaja Blvd. parallel to the border, Fray Mayorga, F. Moyarca, Mar Bermejo) that will enhance the area’s image and accelerate its growth. The new boulevard will allow empty trucks coming into the city to bypass Bellas Artes Blvd. and go directly to Airport Boulevard. Work on these 4 streets is still proceeding.
CANACAR’S plan CANACAR’S plan could be the most comprehensive and feasible since it has used the City’s Urban Development Plan as baseline. The plan has incorporated changes that both CANACINTRA and AIMO have proposed. Their plan to have regular trucks using 12th Avenue in Tijuana and empties using Latinoamericana Street.
Though the City of Tijuana received INDAABIN’s Though the City of Tijuana received INDAABIN’s final document for donation of the area in the export corridor at the end of November, we have since found out that there are another 3 plots of land along the export corridor that have private owners. These will have to go through a similar donation process.
CANACINTRA’s efforts SBC will be discussing ways in which it can support CANACINTRA’s efforts. Our objective is to establish a formal alliance with them.
3/8 Most streets near the Otay POE (industrial area) have been paved; new avenue parallel to the border fence used exclusively for empty trucks getting back to Mexico is one month behind schedule.
6/25 Spoke with Daniel Rivera, IMPLAN director, to discuss status of truck ramp. The project has been completed based on comments from Dionisio Razo of SIDUE. Cost/benefit and environmental impact analyses must be completed. We will need funding for this from State Government, City of Tijuana, CANACINTRA and others. Daniel Rivera will set up meeting with SIDUE’s Carlos Lopez to move this along.
6/25 All streets near Otay Mesa POE (industrial area) have been paved with the exception of 2 that had not been considered. The new avenue parallel to the border fence --used exclusively for empty trucks-- has been completed. Requirement today is for CANACINTRA (with SBC support) to ask for State of Baja California funds to complete the ramp from the new Boulevard back into the industrial area ($2.5 million cost).
Calle 12 and Latinoamericana Streets Calle 12 and Latinoamericana Streets used by cargo to get to Otay border are still bottlenecks as not all carriers are abiding by new rules.
7/5 Meeting with SCT Delegate in Baja California, Ernesto Aguilar Gándara, to inquire about Otay II land acquisition and new lanes at San Ysidro POE. SBC provided critical information for Aguilar to take to Mexico City for his meeting with Raul Flores, new Highways Director.
7/2 Meeting with SIDUE Secretary Alfonso Padrés and CANACINTRA President Marcello Hinojosa to discuss empty truck ramp in Airport area as well as list of road and infrastructure improvement initiatives that SBC is pursuing. Will now have more consistent and detailed information from SIDUE; SCT will also be better connected to SBC based on Secretary Padrés’s experience as head of SCT for Baja California.
7/19 SIDUE has completed the executive project for truck ramp returning to Otay’s industrial area but lacks resources for build out. The project will be registered with the Mexican Ministry of Finance and Public Credit (SHCP). However, there are no funds earmarked for the construction. CANACINTRA will pay for cost/benefit analysis and environmental impact but needs City of Tijuana to provide names of State Government people or companies that can carry out the studies. There is no plan for any ramp over Padre Kino Boulevard to better segment vehicles going to the SENTRI lane.
8/21 SBC Board will consider funding for installation of metal turnstyles at Ped East for Southbound pedestrians. There will also be a tourism/police booth financed with State funds. The project has a $4,500 cost. INDAABIN and SAT were also interested in participating.
8/21 Economic Development Secretary announced that the Medical Lane will now have a paperless pass to avoid the black market. There will no longer be VIP passes. CANIETI has created the technology for this pass.
8/21 Mobility Secretary announced they are working with CBP on a “SENTRI and Ready West” project that would eliminate the need for vehicles coming from west of Zona Rio across to Via Rapida and Padre Kino Blvd. to get in line.
10/30 Medical Lane changes: CANACINTRA Tijuana is coordinating app development and implementation for medical lane use. Application allows doctors to purchase medical passes for patients online, the City of Tijuana to know who is purchasing and using the pass in real time and the user to present a QR code or scan their phone at the booth. The application can also give driving directions to the lane. Application will be released in December and will substitute the cumbersome paper process used today. Fondos Tijuana is paying for the development. The process has taken close to 1.5 years.
11/13 SENTRI and Ready West lanes -- SEDETI proposed these lanes to CBP. SY Port Director stated that this would not be a true option until the No Tags issue improved substantially.
Drivers approaching the ports of entry on the Tijuana side are confused about the routes to take and consequently get lost and/or end up inappropriate specialized lanes.Proposed Solution
Substantially improve signage on the Mexican side at San Ysidro and Otay Mesa. Work with online mapping companies to segment roadways.Enablers
- Office of Congressman Juan Vargas
- Smart Border Coalition
- Comité de Turismo y Convenciones de Tijuana (COTUCO not on list)
- Consejo de Desarrollo Económico de Tijuana (CDT)
- U.S. Customs and Border Protection (CBP)
- Online mapping companies
CDT: CDT is conducting a complementary $40,000 tourism signage study and will hire a consultant to conduct a $250,000 traffic and light study.
As of 1/9/19 As of 1/9/19, per the completed signage plan, SEDETI is coordinating project to install the first 16 nodes. CDT has been tasked to manage the City’s resources for 10 nodes in 2018, 50% of which have been completed. The City will be paying for all of these (2.2 million pesos). The State of Baja Government has invested 4 million pesos and has finished 6 additional nodes. CDT also finished a complementary $40,000 tourism signage study. Signage for this will be paid by Fondos Tijuana (medical lane ). CDT is also looking at proposals for a $90,000 dollar study.
As of 11/30, SEDETI As of 11/30/18, SEDETI is coordinating the project to install the first 16 nodes. The City will be paying for 10 of these (2.2 million pesos) with Fondos Tijuana and the State of Baja Government investing 4 million pesos for 6 more. This is ongoing. CDT has been tasked to manage the City’s resources for the 10 nodes in 2018. Another 29 nodes are pending at a cost of 8.2 million pesos. Tourism signage is not included. -CDT is conducting a complementary $40,000 tourism signage study and will hire a consultant to conduct a $250,000 traffic and light study.
CDT will also manage City CDT will also manage City resources for another 10 nodes in 2019. Next fiscal year will include signage for medical tourism in District 1 as well as additional State of Baja funds for signage close to ports.
8/21 City of Tijuana Economic Development, Urban Development and Mobility Secretaries highlighted that SEDETI is now coordinating 100% of all signage projects (Phase I of Destination signage which SECTURE has financed for up to $4 million pesos; Gastronomic route; and CDT signage proposal). They will combine city and State funds and any balance will have to be covered by private enterprise and various business chambers.
7/19 Plaza Viva Tijuana will get State funding to renovate alleyway and add ramps to guide pedestrians to medical facilities and to Avenida Revolución.
6/26 SBC attended CCE meeting with key stakeholders (CCE, Secretariat of Economic Development, CDT, Cotuco and CDT) to fund entire first phase of destination signage project as well as tourism signage (pleasure and business). Agreement for CCE to fund tourism project (with some financial contribution from SBC). CCE will approach Mayor to have the City cover the $5 million peso balance of the destination signage project. COTUCO’s role to provide maps and key locations for tourism signage to SICAP (signage manufacturing company). COTUCO are also paying for 6 signs for tourism (in English, Spanish and Mandarin). State of Baja California is paying for most signs at SY and EC POEs, for a total of $5.7 million pesos. Funds are in to start work on 6/27/18.
6/1 SBC has been working with CDT to offer a simple way for potential project sponsors to see the sign type and location.
4/19 SBC obtained definitive signage plan for Zona Rio and areas close to San Ysidro border: 254 signs, 45 nodes, with $12.5 million peso price tag. State of Baja California will pay for 12 nodes near El Chaparral and SY (over $4 million pesos), City will pay $2 million. SBC and business associations must decide if they want to “adopt” nodes. This is something CDT and SBC will promote.
4/8 SBC provided funds to manufacture and install 54 signs near the Otay POE advising drivers about lanes to take. Project has been completed.
The PedWest pedestrian crossing into Mexico at El Chaparral Port of Entry has yet to reach its full potential for handling crossers.Proposed Solution
Enable a welcoming and safe connection with downtown Tijuana.
Legislation or ministerial decision to invest a greater percentage of ingress and egress fees in infrastructure at this port of entry.
Legislation to allow radio-frequency identification (RFID) documents to be used when entering Mexico.
As of 10/29, CONAGUA: As of 10/29, CONAGUA has still not authorized the right of way and there has been no progress made with funding. SBC has started to scope out other funding sources which would include philanthropy and foundation money in collaboration with Tijuana’s Economic Development Council and Border Fusion.
8/28 Oscar Cortes, Umbral de las Americas project coordinator for CDT states that executive project and environmental impact study have been completed. However, project is on stand-by due to lack of political will to register the project with Mexican Tax Collection and Credit Ministry (SHCP), and CONAGUA has not authorized the right of way.
8/23 Meeting with new INAMI Director Edgar Gonzalez to discuss current needs and challenges.
6/22 Tour of El Chaparral exit, Plaza Viva Tijuana and surrounding areas with COTUCO, CDT and photographer to discuss signage needed to complement existing pedestrian signage plan for Zona Río.
Umbral de las Américas Umbral de las Américas project still in need of $10 million of funding. The CDT has stressed the need for financing from State and Federal agencies to Governor Vega at their Assembly on 6/28.
SBC has been discussing SBC has been discussing a potential legislative or internal ministerial decision to allow for a higher percentage of ingress and egress fees going to INAMI to fund basic border infrastructure at port of entry. During the Regional Chamber delegation trip from 4/15 – 4/18, we brought the issue up with the Secretary of the Interior in Mexico City and with the Tourism Secretariat.
1/26 On 1/26 SBC proposed to work with INAMI on legislation to allow for RFID documents to be accepted when entering Mexico. 85% of all crossings into Mexico are from people who live in the binational region. We are still waiting for a response from INAMI Director Rodulfo Figueroa.
November As of November, average of 2,000 users (800 foreigners and 1,200 Mexican nationals), open from 6am to 10pm, 2 shifts, 15 employees. The comparison is 15,000-18,000 Northbound pedestrians, 25,000 for PedEast Northbound and 2,000 Northbound for CBX.
INAMI and CBP started Pilot INAMI and CBP started Pilot in December to identify Mexican citizens entering Mexico using RFID documents with place of birth: Have segmented lanes by Mexicans and all others. CBP will provide scanning equipment. Will take all WHTI (Western Hemisphere Travel Initiative) compliant RFID documents such as Border crossing cards, green cards, Global Entry and SENTRI, but not Enhanced Driver’s license cards. Only Mexican citizens are involved in the pilot. Mexican immigration legislation must be amended to allow for WHTI documents to be accepted. 85% of all crossings into Mexico are from people who live in the binational region.
The Otay Mesa agricultural inspection facility has yet to develop its full capacity to clear agricultural cargo before entry into the U.S.Proposed Solution
Due to the launch of Unified Cargo Processing on the U.S. side of the Otay Mesa Port of Entry, the Joint Agricultural Cargo Inspection facility has lost much of its significance and growth capability. The coalition has instead changed its focus to Unified Cargo Processing.Enablers
- Private Enterprise
1) November 2018: Average November 2018 wait times were 59 minutes for FAST truck and 150 minutes for Standard trucks. This compares to 66 minutes for FAST and 96 minutes for Standard trucks in November 2017.
2) 8/20 Average wait times for cargo under Unified Cargo Processing are still long for FAST trucks: average of 93 minutes, 88 minutes for Standard trucks and 54 minutes for trucks going through join inspection on Mexican side.
3) 6/27 Otay Port agents seeing large reduction in cargo crossing times with a hybrid UCP model. Still awaiting 2 additional booths.
4) 5/31 DFO Flores stated that Unified Cargo Processing has had a drastic improvement since April due to hybrid model whereby Mexican customs does primary inspection on their side. 7 FAST lanes open once trucks reach US side. Moved SAT inspection booths farther so that trucks do not block the entire lane on US side. 2 new booths will be added by end of July, so this should improve throughput.
5) Perishable goods Perishable goods trucks are no longer going through the old joint inspection facility in Mexico.
6) May 2018 Unified Cargo Processing continues to have challenges. CBP waiting for 2 additional booths – at issue is the long wait times at primary processing. SBC committed to sending a proposal to CBP and SAT to share real time data and analytics in April Cargo Group meeting.
7) The joint inspection facility The joint inspection facility in Tijuana is currently working with 39 companies from 7am to 10pm. Participating companies must be CTPAT/OEA and belong to various industries.
8) 3/1 As of 3/1, Joint Inspection of NARP (National Agricultural Release) products has concluded. SAT states that facility could be used to jointly inspect 39-40 companies.
9) Unified Cargo Processing Unified Cargo Processing started strongly in the last week of December and first 2 weeks of January, but it has had some hiccups due in part to 3 booths being used. DFO for Port has asked for another 2 booths and has gotten the OK from HQ. GSA is responsible for the actual manufacture. Have put a traffic control officer to move cargo to empty lanes. Our Commercial Crossing Information System tells us that the average time to cross using UCP from 2/1-2/28 was 70 minutes. This is above the average times for regular trucks which were 60 minutes on average. UCP is 40% of all cargo traffic.
10) January 2018 Unified Cargo Processing at Otay Mesa had a soft launch on December 22nd. It will also be implemented in Tecate. Most FAST trucks are using the system (Lawrence A. Fanning Assistant Port Director- Trade). They have had maximums of 1,333 per day and average crossing times of 20 minutes. Excess cargo being handled on Mexican side. May need 5 booths instead of 3. SBC has proposed way to monitor the results with Enrique Orantes of SAT and Rosa Hernandez and Pete Flores of CBP
11) September 2017 At the end of September 2017 SAT and CBP announced the launch of a Unified Cargo Processing option on the U.S. side of the OM POE. This will dramatically reduce wait times for qualifying CTPAT trucks (elimination of separate cargo inspections), and is the result of successful UCP systems in Arizona (Nogales, San Luis) and Calexico ports of entry.
Northbound truck cargo clearance presently undertaken at the Otay Mesa Port of Entry contributes to traffic back-ups and increased wait times.Proposed Solution
Enable advanced secure pre-inspection in Mexico at a distance from the border.Enablers
- City of Tijuana
- AIMO (Otay Mesa Industrial Association)
- AAA (Association of Customs Brokers)
- CANACAR (Carrier Association)
1) USMCA: USMCA has a section on trade facilitation that treats pre-clearance favorably in that each party adopt or maintain “specific expedited customs procedures” for express shipments while maintaining appropriate customs controls. The procedures must provide for information required to release an express shipment to be submitted and processed before the shipment arrives, allow a single submission of information such as a manifest covering all goods contained in the shipment “through, if possible, electronic means” and provide for subject shipments, “under normal circumstances,” to be released immediately after arrival, as long as all required documentation and data are submitted.
SBC SBC believes that the region’s stakeholders need to attract solutions providers for this project.
6/26 Call with GMX-21 to review feasibility to implement project starting in Laredo, Texas: based on my trip to Washington for the Border Trade Alliance meeting, there is substantial interest from CBP to work on a solution to pre-clear trucks on their way to the port from Mexico. Thomas Overacker, Executive Director of Cargo and Conveyance Security in the Office of Field Operations, is open to receiving proposals.
Cargo Pre-Clearance Cargo Pre-Clearance has been put on hold. Performance of Unified Cargo Processing (UCP) will give us critical information for a pre-clearance need. Pre-clearance is a step above UCP and will dramatically help efficient lane management at the port (limited to 4 lanes today on the approach from Mexico).
Funding still not available to company that can implement this solution Funding still not available to company that can implement this solution. Possibility to implement Pre-clearance for CTPAT trucks and FAST drivers using SB 1228 funds (Senator Hueso). SBC will also work with SANDAG to better understand the current pre-clearance process that may be used at Otay Mesa II.
SBC’s Commercial Cargo Information System SBC’s Commercial Cargo Information System project is an important baseline to a Cargo Pre-Clearance solution. We require CBP and SAT go-ahead for this as well as carriers and exporters willing to provide GPS information from their cargo.
Unified Cargo Processing We view Unified Cargo Processing as part of full cargo pre-clearance solution that can alert authorities of any anomaly with FAST, regular or empty conveyances.
SAT Tijuana SAT Tijuana has achieved several positive results: hazardous materials schedule has more than doubled; 10 booths are now open for cargo inspection on U.S. side of the border.
INDAABIN Optimal use of the export corridor and adjoining streets once the export corridor parcel is donated to INDAABIN. INDAABIN will then provide basic services such as security, cleaning, lighting and maintenance to the 2 km road. SAT will plan a comprehensive project to convert the roadway into an authentic fast trade lane (video and technology infrastructure).
New northbound lanes leading to the San Ysidro Port of Entry in space made available in Mexico by clearing the disused “Puerta de México” structures
Plans have not been completed to expand northbound lanes at the San Ysidro Port of Entry to accommodate traffic from the new toll road linking Tijuana International Airport to Playas de Tijuana.
Understand time frame for Mexico to demolish the structure, as well as the scope of the lanes and access from Tijuana streets.
Develop a design proposal for submission to the City of Tijuana.
10/30: The local INDAABIN offices have no information about exact area, funding, timeline or potential RFP. SCT is coordinating this project through Yvonne Reul, SCT Deputy General Director of Cross Border Infrastructure.
7/19 State Government has $3 million pesos to invest. INDAABIN is facilitating the project to demolish buildings. SIDUE told us that the project will be ready to link the lanes to the modernized SY Port of Entry towards the end of 2019. The State Government is looking into the toll road from the airport but requires local Congress approval.
7/2 Meeting with SIDUE Secretary Alfonso Padrés and Strategic Projects Director Carlos Lopez to discuss infrastructure improvement initiatives that SBC is pursuing. Will now have more consistent and detailed information from SIDUE; SCT will also be better connected to SBC based on Secretary Padrés’s experience as head of SCT for Baja California.
6/25 SBC submitted letter to SCT delegate in Baja California asking him for current information, upcoming tasks and timeline for this project.
Yvonne Reul, SCT Technical Director for Roads Yvonne Reul, SCT Technical Director for Roads and Highways, informed us in Mexico City on 4/16 that structures will be demolished 6 months after bid is awarded. Bidding process should start in May.
6/28 SBC spoke with Congressman Coronado, President of Baja Congress about approval of State insurance for toll road. There is no date yet.
City of Tijuana (SDUE) City of Tijuana (SDUE) working on study for lane types and access; it will present it to CBP.
2/7 Meeting with Salvador Lamas, INDAABIN Director for Tijuana: coordinating with SAT and SCT to demolish the area. SCT and SAT are working directly on the project and must formally present it to INDAABIN. This is part of the “Conjunto El Chaparral” set of projects. The critical infrastructure will be the toll road from the Airport to Playas de Tijuana. It will have an exit to the 8 new lanes at SY POE. 6 lanes will empty into the 8 lanes on the western side of SY. The project has been awarded to a Spanish company which will begin construction this year ($80 million dollar investment). Asked Salvador for more information from boss, Fabiola Sanchez in Mexico City.
Meetings with CCE Meetings with CCE on 2/19 and with Governor’s chief strategist Mario Diaz on 2/16: The City of Tijuana is open to any solution for the 8 new lanes. They realize that the lanes will be open before the toll road coming from the Airport is put in place. Mario Diaz provided important information about the toll road project as well as Otay II and the modernization of the current port of Otay.
SBC will be working with CDT As part of new Binational Commission, SBC will be working with CDT to determine how best to use the 8 new lanes and submit a proposal to the City of Tijuana.
SBC is working with CDT SBC is working with CDT and the Mexican Consulate to open direct communication with both SIDUE and SCT, respectively, to obtain clear information as to any project for the 8 new Northbound lanes. It appears that SCT has a federally funded project that was going to be managed by SIDUE.
SBC asked Tijuana Mayor SBC asked Tijuana Mayor for input on 8 new Northbound lanes in November
Car owners with personal SENTRI status have experienced excessive delays in obtaining SENTRI approval for new vehicles.Proposed Solution
Eliminate vetting for new SENTRI car approval.Enablers
11/13: As of 11/13, backlog is 1 week.
10/18 As of 10/18, backlog is 6 weeks.
8/14/18 As of 8/14/18, backlog is 2.5 weeks.
6/12 As of 6/12, backlog is at 9 weeks.
4/3 As of 4/3, backlog is at 2 weeks
2/13/18 As of 2/13/18, backlog for new vehicle vetting is 1 week. Local CBP has been helping federal CBP for screening. SENTRI new enrollment now at 3 weeks. GLOBAL entry new enrollment now at 2 weeks.
DFO Pete Flores DFO Pete Flores communicated to us on 8/14 they are now working locally on the backlog.
3/20 SBC delivered letter on 3/20 and Otay Mesa Chamber of Commerce did same the week of 4/3.
Complex design, permitting, operational, construction, and financial decisions remain to be made.Proposed Solution
The critical breakthrough will be to Customs and Border Protection authorization of the opening of a port of entry where track will cross, including an inspection mechanism, either side by side with Mexican agents or in separate areas on adjacent sides of the rail border.Enablers
- Baja Rail
- Mexican Consulate
11/8: SAT has authorized the crossing location. Baja Rail could start construction in March of 2019 but needs to conclude an environmental study and get CBP approval. DFO Flores will not make any decisions until he sees the environmental study results, among others.
11/2 Baja Rail is working with 2 firms for analyses that are a prerequisite for any port authorization in Tecate. One is a firm with legal expertise on environmental issues and the other is a company that specializes in environmental biology aspects (flora and fauna).
8/30/18 Still need CBP to formally approve crossing point and inspection area locations. Environmental impact seems to be an important issue though the concessionaire does not intend to change the current route in any way. There are a number of environmental studies done on the subject, so no sense in investing time and money on another one. State of Baja California is actively pursuing conversations with SAT for Mexican side location and go ahead. Region’s stakeholders must support this initiative.
7/12/18 Jorge Izquierdo of Baja Rail stated that Plan B will be to set up Primary (about 700 feet from the border) and Secondary (6 miles from the border at Campo, CA) processing facilities and one Mexican inspection facility.
6/25 Roberto Romandia, CEO of Baja Rail, stated that there will be 2 inspection stations, one for Mexico and 1 for U.S. Near term decision for location of US facility (MTS, SAT and CBP). Feasibility studies already concluded for tunnels, railway and bridges. Next step is financial feasibility. Total investment will be $52 million. Will start using own capital and are looking for financing / equity among 3 groups.
Meetings in Mexico City Meetings in Mexico City as part of SD Regional Chamber of Commerce Delegation. Baja Rail provided most current information about the project to Mexican Foreign Ministry (SRE), asked SAT for more decision making involvement in inspection station. Secured Baja Rail project presentation at June meeting of Binational Bridges and Border Crossings Group (BBBXG). SAT committed to project follow up; Baja Rail asked SAT’s technical opinion about the project’s overall design and inspection machinery. SAT asked for project timeline and will be visiting Desert Line’s offices in June.
Baja Rail Baja Rail is leaning towards having inspection stations in Mexico and United States.
Meetings with MTS Meetings with MTS, CBP, Union Pacific and Kansas City Southern in Coahuila and Tamaulipas (Piedras Negras and Laredo) shed light on customs operations, infrastructure review, efficient joint rail inspections, installed capacity, time frames and opportunity areas.
Campo meeting in February Campo meeting in February with DHS and CBP resulted in a decision to put the joint inspection facility on the U.S. side, increasing the investment that Baja Rail will have to make.
Baja Rail Baja Rail moving additional commodities; has federal permits for El Sauzal line; LOIs signed with Chinese company for the construction of an industrial park served by the RR and with naval company at El Sauzal port. 2018 topics are resolving Joint Inspection facility (JIF) location either in Mexico or US and greater involvement by State of Baja Government. Once JIF is resolved, Baja Rail will start building to fulfill milestones (1.6 years). Will push for new RR in Mexicali for Silicon Border and another one for Constellation Brands.
New RR in Mexicali for Silicon Border Will push for new RR in Mexicali for Silicon Border and another one for Constellation Brands.
Interministerial meetings in Hermosillo Interministerial meetings in Hermosillo on 10/25 revived Plan A for a joint inspection facility in Tecate, Mexico and Plan B for a joint inspection facility on the U.S. side of the border. Both the State of BC (head of Cabinet Coordination for Strategic Projects, Mario Díaz) as well as the Mexican Foreign Ministry are pulling for Plan B. Critical for MTS to support Baja Rail in this effort.
The State of Baja California The State of Baja California through SIDUE (Carlos Alfaro in charge of Special Projects) and Admicarga (Architect Maceira) are involved in any interaction with CBP and SAT. Baja Rail would like to involve Carlo Bonfante, Economic Development Secretary.
9/1/17 On 9/1/17 Baja Rail (BJRR) made a $3.8 million payment on the $7-million concession for Desert Line. $60 million investment will be needed in infrastructure on US side of the border. Baja California state government has acquired 40% of the land required for the Tecate-Ensenada (El Sauzal) line (98 km). A Chinese company, CRCC, may participate in the construction of the line to Ensenada. Thirty-four km of line will be built to serve the new Tecate brewery facilities.
Baja Rail Baja Rail officially acquired the Desert Line Concession on July 28 (at Federal Bankruptcy Court).
U.S. Green Card holders residing in Mexico are limited to using slower all-traffic lanes, contributing to congestion in these lanes.Proposed Solution
Promote awareness among Green Card holders crossing into the U.S. at the border of the advantages of commuter status, through targeted information initiatives.Enablers
- Otay Mesa Chamber
- Private enterprise
October 2018: October 2018: SBC completed media campaign with 15 media outlets including Uniradio, Telemundo, PST and InfoBaja. Social media promotion began on November 1st.
August 2018 August 2018: Media campaign will start in September in Tijuana. We will work with 4 Comunicación marketing company.
6/29/18 6/29/18: CDT, CDT board member and SBC are jointly working on execution strategy which will be ready in July.
CBP internally discussing CBP internally discussing messaging they want to provide based on video we created for them (with Otay Mesa Chamber of Commerce).
Collaboration with Mexican Consulate Collaboration with Mexican Consulate: we will be invited to the Consulate’s Community Outreach days starting in March. SBC has not yet provided promotional materials to Consulate for promotion. Some of this will depend on CBP direction.
Still working with CDT We are still working with CDT to launch a promotional program in Tijuana through the CDT’s Binational Commission.
3/5 Meeting with Sally Carrillo to move forward with video and action items on US side of the border.
2/28/18 As of 2/28/18 we are working on a strategy to promote the program on the Mexican side of the border with CDT in the context of the Binational Commission which SBC is leading: use of flyers, leveraging COTUCO, SECTURE, Hospitals and resorts will be critical.